INTELLIDOSE

INTELLIDOSE

0.00

Automatically manage your nutrient and pH levels, set remote alarms and data log your progress. Grower approved for 10 years, the IntelliDose sets the industry standard for a small commercial auto-dosing. 

Where to Buy

The IntelliDose set the industry standards for auto dosing, allowing you to dose up to a 9-part blend (nutrients, additives, pH adjuster) while maintaining your preset EC and pH settings. Automatically manage your nutrient and pH levels, set remote alarms and data-log your progress with one simple controller.



KEY FEATURES

EASE OF USE

The large, interactive screen allows you to easily maneuver between calibrating, set points, alarms and configuration. If you can program a number into a cell phone, you can program your IntelliDose.

RUN UP TO 4 IRRIGATION STATIONS

The IntelliDose can run up to 4 irrigation stations, allowing different areas of your grow space to be watered on different schedules. Use one reservoir or have a pump feed each station at different times. You can also set your system to only irrigate during the daytime.

WORKS WITH ANY NUTRIENT LINE

Any nutrient line can be used with the IntelliDose - liquid or powder. Simply determine your proper dilution ratios (don’t worry, we can help) and the IntelliDose will keep the reservoir at your perfect recipe 24/7.

PERISTALTIC PUMPS

Peristaltic pumps allow you to have all of your nutrient stock tanks on the ground, allowing for much larger quantities of pre-mixed solutions. This lowers the chance of leaks and spills, and will cut down on your labor. Autogrow’s peristaltic pumps are heavy duty, pumping 300ml/minute and can run any size reservoir (even over 1,000 gallons!) with ease.

CONNECT WITH OR WITHOUT A PC

The IntelliDose has the ability to be connected to a PC, but it’s not necessary. Growers should determine their own privacy level; if you don’t want your controller online or connected to a PC, it doesn’t need to be.


TECHNICAL INFORMATION

  • 9 outputs 24VDC (or same voltage as supplied by plug pack) 

  • Nutrient measurement units EC, CF or TDS (500/640/700) 

  • Measured range 0.00 to 9.99EC, 0.1 to 99.99CF, 0 to 7000PPM 

  • Nutrient resolution to .01mS/cm, 0.1CF 

  • Nutrient measurement accuracy +/-0.1EC, 1.0CF or 10PPM (temperature compensated) 

  • Nutrient dosing range 0.00 to 5.99EC, 0.1 to 59.9CF, 0 to 4200PPM 

  • pH resolution and accuracy - 0.1pH 

  • pH measurement range 2pH to 12pH 

  • Nutrient and pH dosing times settable from 0 minutes to 254 minutes

  • Dosing interval settable from 0 minutes (continuous dosing) to 254 minutes 

  • Sequential dosing to prevent power surges 

  • Solution temperature accuracy 1°C/2°F 

  • Temperature range 0-50°C/32-125°F 

  • Operating temperature range 0-50°C/32-125°F (not in direct sunlight) 

  • Power source - 120V/240V into 24VDC plug pack (supplied) 

  • Dosing shut off 

  • if nutrient is below 0.1EC, 1.0CF, 10PPM 

  • if pH is below 4.5 or above 8.0 

  • if dosing effect is counterintuitive (by dosing pH lower, the measured pH goes up)