MultiGrow is your all-in-one, multiple grow area controller. It can run up to 8 different growing zones, managing the environment as well reservoirs and irrigation schedules.
Ease of use. Sophisticated control. Effortlessly manage delivery of nutrients and control consistency of humidity, temperature, and light. Our system lets you control multiple greenhouse climate compartments with fertigation and/or hydroponic dosing of multiple tanks. Monitor root and aerial environments, and receive alerts via rule-based systems for alarm conditions.
The Multigrow controller is a modular system that can control the climate of up to 8 greenhouse/warehouse compartments in addition to managing other functions like fertigation, hydroponic dosing and environment monitoring; the best part is you only pay for the functions you will be using.
The MultiGrow is fully customizable and configured to your needs, so you only pay for what you need. The products are time-tested and proven in greenhouses, protected cropping, warehouses, and grow-rooms. The experts who will help you with the installation and programming of your MultiGrow have over three decades of greenhouse automation knowledge between them and our ongoing technical support and customer service team are world class.
The EnviroSensor monitors:
The remote sensor monitors:
Passive cooling (vent control)
Cooling pad/wet wall
Multiple light banks
Batch dosing systems (up to 50 recipes)
Continuous dose systems (up to 8 different reservoirs)
Dosing of up to 10 different nutrients/additives plus pH adjuster, per reservoir or recipe
Irrigation - using accumulated solar radiation, via schedule or rootzone moisture content
Heater or chiller to maintain ideal reservoir temperature
Outputs & Inputs
Our modules have 10 relays which can be used to directly drive devices such as dosing pumps and switch on larger equipment. Can be set up for automation but also has full hardware override – meaning that you can always take control.
RS485 to communicate with controller
Power input 12/24V (AC or DC)
Output voltage matches input voltage
The MultiGrow can connect to up to 32 of any particular module simultaneously. 32 output modules would provide up to 320 individual outputs, and you could also connect 32 nutrient probes and 32 environment sensors at the same time. The mix of these modules depends on how you grow, what you grow, and what other equipment you have. Your Autogrow dealer will help guide you through these decisions
One MultiGrow can control up to 8 compartments
The modules are all connected via an RS485 daisy chain. The maximum total length of this chain is 1.6km. Expansion options are available beyond that.